Factory Horizontal Conventional Large Spindle Bore Lathe CS6266 CS6250

CS6250C  CS6266C  Specifications ItemCS6250CCS6266CMax. Swing dia. Over bed500mm660mmMax. Swing dia. Over cross slide300mm420mmMax. Swing dia. Over gap710mm870mmEffective length in gap240mmMax. Workpiece length750/1000/1500/2000/3000mmMax. Turning length700/950/1450/1950/2950mmSpindle bore diameter  &nbs

Featured Products

CS6250C  CS6266C  Specifications
 
ItemCS6250CCS6266C
Max. Swing dia. Over bed500mm660mm
Max. Swing dia. Over cross slide300mm420mm
Max. Swing dia. Over gap710mm870mm
Effective length in gap240mm
Max. Workpiece length750/1000/1500/2000/3000mm
Max. Turning length700/950/1450/1950/2950mm
Spindle bore diameter            105mm
Taper of spindle bore              113
Type of spindle nose ISO702/II No.8
Spindle speeds        12 steps; 36-1600r/min
Tool section25x25mm
X-axis feedratio50Hz:1.9rpm; 60Hz:2.3rpm
Z-axis feedratio50Hz:4.5rpm;60Hz:5.4rpm
X-axis feeds0.027-1.07 65kinds
Z-axis feeds0.63-2.52 65kinds
Metric threads range1-14mm 22kinds
Inch threads range28-2 TPI  25 kinds
Module thread range0.5-7mm  18kinds
Diametric pitch threads56-4DP   24 kinds
Tailstock quill diameterΦ75mm
Max. Travel of tailstock quill150
Taper of tailstock quillMorse No.5
Main motor power7.5kW
Coolant pump motor power0.12kW

Standard Accessories:

3, 4-JAW CHUCK AND ADAPTER, 4-WAY TOOL POST, STEAD REST(120-260MM for CS6250B(C), CS6266B(C), , FOLLOW REST, FACE PLATE, DIRVE PLATE, FOOT BRAKE, FULL LENGTH SPLASH GUARD(SHORT TYPE ON 3M LATHE), LONGITUDINAL MECHANICAL STOP(WITHOUT ON 3M LATHE), HALOGEN LIGHT. CHUCK COVER, TOOL POST COVER, ALL STANDARD ACCESSORIES, LIGHT GRAY AND DARK GRAY COLOR. PACKING WITH WOODEN CASE FOR SHIPMENT.


Factory Horizontal Conventional Large Spindle Bore Lathe CS6266 CS6250
Factory Horizontal Conventional Large Spindle Bore Lathe CS6266 CS6250

Factory Horizontal Conventional Large Spindle Bore Lathe CS6266 CS6250
Factory Horizontal Conventional Large Spindle Bore Lathe CS6266 CS6250

FAQ 
1. How can I choose the most suitable machines ?
A:  You can choose the exact model by yourself.  Or you can tell us your specifications, to let us choose the best model for you, too.

You can also send us the product drawing, and we will choose the most suitable machines for you.
 .
 2. When do you deliver?
A: It depends on the machine and model you choose. Mostly 1.5 months - 3 months. All machines are brand new, made according to your order. Occasionally there will be a few machines available from stock. You can send us a message or mail to check exact delivery time.

  
3. Is machine tested ?
A: The accuracy, noisy will be tested according to China GB standard.
 
4. What is your trade terms?
A : FOB, CFR and CIF all acceptable.
 
5. What's the Payment Terms ?
A : T/T 30% down payment when order ,70% balance payment before shipment ;
Irrevocable L/C at sight also acceptable but it will subject additional bank fee.

 

6. Do you accept cash or L/C?
A: We accept T/T or L/C, all through banking system. We do not accept cash, 'cause we are an official registered company that all payment must go through official bank account.


7. What's the MOQ?
A: 1 set (Only some low cost machines will be more than 1 set) 


8. How is the warranty?
A: 12 months after shipment date


9. If I have a problem setting up/ getting it running problem, will you be available by email to assist in solving the problem.
A: Video technical support, online service, we can answer you in 24 hours.































 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours